On November 14, 2026, China’s Commercial Aircraft Corporation (COMAC) made headlines when its CE-25A completed its first crewed flight in Binzhou, Shandong Province. Weighing 10 tonnes and powered by ten electric ducted fans, the aircraft represents an important achievement in the development of battery-electric regional aviation.
However, while the flight generated considerable excitement, neither large electric aircraft nor distributed electric ducted-fan propulsion are entirely new concepts. Heart Aerospace has already flown a heavier battery-electric aircraft, while the now-defunct German manufacturer Lilium spent years developing an aircraft based on remarkably similar propulsion technology.
So, what makes COMAC’s achievement significant, and what can it teach us about the future of electric aviation?
COMAC CE-25A: From Autonomous Testing to Crewed Flight
Although November 14 marked the CE-25A’s first crewed flight, the aircraft had already undergone an extensive flight-testing programme.
Its first uncrewed autonomous flight took place on February 2, 2026. Over the following months, COMAC conducted 19 uncrewed validation flights to assess the aircraft’s performance and reliability.
The first crewed flight carried two pilots and a flight-test engineer. The aircraft remained airborne for 16 minutes and 38 seconds, covering approximately 60 kilometres, with COMAC reporting that its systems performed as expected.
The CE-25A is designed as a 19-passenger regional aircraft, with the following published specifications:
| Specification | COMAC CE-25A |
|---|---|
| Maximum takeoff weight | 10,000 kg |
| Passenger capacity | 19 |
| Propulsion | 10 electric ducted fans |
| Cruising speed | 300 km/h |
| Cruising altitude | 2,400 m |
| Claimed range | 400 km |
| First uncrewed flight | February 2, 2026 |
| First crewed flight | November 14, 2026 |
The aircraft has been developed through a collaboration involving COMAC, battery manufacturer CATL and Shanghai Jiao Tong University, among other partners.
China’s Civil Aviation Administration has also accepted COMAC’s application for type certification. While this is an important step, the aircraft remains in development, and a commercial entry-into-service date has not been confirmed.
Heart Aerospace Has Already Flown a Larger Electric Aircraft
Despite its impressive specifications, the COMAC CE-25A is not the largest battery-electric aircraft to have taken to the skies.
That distinction currently belongs to Heart Aerospace’s X1 demonstrator.
On August 12, 2026, the X1 completed its maiden flight at Plattsburgh International Airport in New York. Weighing more than 11.3 tonnes, the demonstrator surpassed the CE-25A in takeoff weight.
During its 27-minute flight, the X1’s all-electric propulsion system delivered more than one megawatt of power, demonstrating battery-electric flight at a scale approaching that of commercial regional aircraft.
The X1 was developed as a full-scale technology demonstrator for Heart Aerospace’s original 30-seat ES-30 regional aircraft.
However, in September 2026, the company announced a significant change in direction, unveiling the ES-36, a larger 36-seat hybrid-electric aircraft.
The ES-36 uses two electric propulsion systems, each rated at 1.65 MW, and combines battery power with onboard fuel-powered generation to extend its operational capabilities. Heart Aerospace is targeting its first flight in 2028 and commercial entry into service in 2031.
This transition highlights an important reality facing electric aviation: while batteries can power increasingly large aircraft, achieving practical commercial range and payload remains challenging.
COMAC’s Electric Ducted Fans: A Familiar Technology
What makes the CE-25A particularly interesting is its propulsion arrangement.
Instead of using conventional open propellers, COMAC has installed ten electric ducted fans, distributed across its wings, with five fans on each side.
This is an example of distributed electric propulsion, a concept that takes advantage of the flexibility offered by electric motors.
Unlike conventional combustion engines, electric motors can be relatively compact and installed at multiple locations without complicated mechanical power-transmission systems. This allows aircraft designers to integrate propulsion more closely with the wing.
Distributed propulsion can potentially improve low-speed aerodynamic performance, provide additional control authority and create opportunities for more compact installations. However, these benefits depend heavily on the aerodynamic integration and efficiency of the overall system.
The CE-25A’s relatively compact propulsion arrangement is particularly interesting because the technology bears a striking resemblance to that employed by the Lilium Jet.
What COMAC Can Teach Us About Lilium’s Failure
German electric aircraft manufacturer Lilium pursued one of the most ambitious propulsion concepts in the emerging electric aviation industry.
Its Lilium Jet featured 36 electric ducted fans integrated into movable wing and forward surfaces. The fans were designed to provide both vertical lift and forward propulsion, allowing the aircraft to operate without conventional runways.
Despite attracting substantial investment, Lilium encountered severe financial difficulties and entered insolvency proceedings in 2024. Attempts to revive the business ultimately failed in early 2025.
However, Lilium’s collapse should not necessarily be interpreted as a failure of electric ducted-fan technology itself.
One of the central engineering challenges was the decision to combine relatively small ducted fans with vertical takeoff and landing capability.
During vertical flight, the aircraft’s wings contribute little useful lift. Consequently, the propulsion system must generate sufficient thrust to support the entire aircraft’s weight.
The Lilium Jet’s relatively high disc loading meant that the aircraft required considerable power during hover, placing substantial demands on the batteries.
This is where COMAC has taken a different approach.
The CE-25A uses a conventional fixed-wing configuration, relying on its wings to generate lift and its ducted fans primarily to produce forward thrust.
By eliminating the requirement for vertical takeoff and landing, COMAC avoids the substantial energy demands associated with sustained hover.
It has also adopted fewer and apparently larger ducted fans than Lilium.
From a propulsion perspective, increasing the combined fan disc area can reduce disc loading and the power required to generate a given static thrust. However, larger fans also introduce structural, aerodynamic and installation trade-offs, and the best configuration depends on the aircraft’s operating requirements.
One could argue that had Lilium pursued a conventional takeoff and landing aircraft, or perhaps a short takeoff and landing configuration, its propulsion technology could have been applied to a considerably less demanding mission.
That alone would not have guaranteed commercial success. Lilium also faced significant financing, development and certification challenges.
Nevertheless, COMAC’s approach demonstrates that distributed electric ducted-fan propulsion has potential applications beyond VTOL aircraft.
The Biggest Challenge Remains Battery Energy Density
Despite its promising configuration, the CE-25A faces the same fundamental challenge confronting most electric aircraft developers: battery energy density.
COMAC has published a range of 400 kilometres and a cruising speed of 300 km/h. However, details concerning its battery chemistry, pack capacity, battery mass and installed propulsion power remain undisclosed.
Independent engineering estimates suggest the aircraft could require approximately 800 kW of electrical power during cruise, although actual consumption will depend on its aerodynamic efficiency, operating weight and propulsion characteristics.
At 300 km/h, travelling 400 kilometres would take approximately 80 minutes.
Assuming a constant 800 kW electrical power demand, the cruise portion alone would require approximately 1,070 kWh of electrical energy.
This does not account for the additional energy required during takeoff and climb, or the energy reserves needed for commercial operations.
Consequently, the aircraft’s battery pack would need considerably more capacity than this simplified cruise-energy calculation suggests.
The published cruising altitude of 2,400 metres is also relatively modest for a regional aircraft. At higher altitudes, reduced air density changes the performance of the wings and ducted fans, although it can also reduce aerodynamic drag. The optimum operating altitude depends on the complete aircraft design and mission.
Perhaps more importantly, the published 400-kilometre range should not automatically be interpreted as the commercially usable range.
Aircraft operators must consider energy reserves, diversions, weather conditions, battery degradation and operational safety margins.
Depending on the battery technology and applicable reserve requirements, the practical route distance could be substantially shorter than the advertised maximum.
These limitations are not unique to COMAC. They apply broadly to battery-electric aircraft operating with current energy-storage technologies.
Why Regional Electric Aircraft Still Make Sense
It is tempting to compare the CE-25A with conventional commercial airliners, but such comparisons overlook the intended application of these aircraft.
With current battery energy densities, fully electric propulsion is better suited to short regional routes than long-distance commercial aviation.
Yet the potential market remains considerable.
Short connections between regional airports, island communities and remote locations could benefit significantly from electric aviation.
Electric motors offer the possibility of reduced maintenance requirements compared with conventional combustion engines, while electric aircraft produce no direct emissions during flight. They can also offer quieter operations and potentially lower energy costs.
These benefits will depend on electricity prices, charging infrastructure, battery replacement costs and the economics of operating smaller aircraft.
Nevertheless, regional aviation provides a potentially valuable market where the advantages of electric propulsion can begin to outweigh its limitations.
Why COMAC’s Achievement Deserves to Be Celebrated
COMAC has not invented electric ducted fans, nor has it developed the world’s largest battery-electric aircraft.
Heart Aerospace has already demonstrated electric propulsion on an even heavier aircraft, while Lilium previously showed how distributed ducted fans could be integrated into an unconventional aircraft configuration.
However, the CE-25A represents another important step towards developing electric propulsion for commercial aviation.
The aircraft has progressed through autonomous flight testing, successfully completed its first crewed flight and entered the initial stages of the type-certification process.
More importantly, its configuration explores how distributed electric propulsion can be applied to conventional regional aircraft without the substantial energy penalty associated with vertical flight.
The lessons emerging from Heart Aerospace, Lilium and COMAC are particularly valuable because they illustrate different approaches to the same fundamental challenge: making electric propulsion practical for passenger transport.
The real breakthrough in electric aviation will not be the first battery-electric aircraft to fly, or even the largest. It will be the development of aircraft capable of operating safely, reliably and economically in regular commercial service.
COMAC’s CE-25A may not represent an entirely new technological concept, but it is another encouraging milestone on that journey.
